ISI / BIS Certification for Hot Dip Galvanized Stay Strand

A wire or cable strand that has been subjected to a galvanizing procedure that involves immersion in molten zinc to provide a protective coating is known as a "hot dip galvanized stay strand." With this treatment, the strand's resistance and durability in many engineering, construction, and utility applications would be improved while corrosion prevention is achieved. A strong, consistent zinc coating is produced by the hot dip galvanizing process, providing increased resistance to rust, corrosion, and environmental elements. In order to provide an extended service life in difficult situations, this treated strand offers prolonged protection, making it suited for use in exposed and tough locations such as utility poles, bridges, or cable tensioning systems.

Because of their lifespan, compliance with safety regulations, resistance to corrosion, and structural support, hot dip galvanized stay strands are essential parts that greatly enhance the dependability and stability of a variety of systems and structures.

Under IS 2141:2000, all hot dip galvanized stay strands are now required to be part of the ISI Certification Scheme.

The criteria for hot dip galvanized stay strands for railway track signals, transmission line poles, telegraph and telephone poles, and signal poles are covered by this standard.

Without the ISI Mark, this product cannot be marketed, imported, or exported into the Indian consumer market.

About ISI / BIS Certification

Indian Standards Institute, or ISI was renamed the Bureau of Indian Standards (BIS) in 1987. The official mark that the Bureau of Indian Standards provides for manufacturers of various goods is the ISI Mark. It is used to indicate compliance with Indian standards (IS) set by the Bureau of Indian Standards (BIS) and has been used as a conformity marking for industrial products. Manufacturers received permission from BIS to use the ISI Mark on items that comply with relevant Indian requirements through the product certification program. 

Only manufacturers (domestic or foreign) who produce the finished product will be awarded ISI Certification. This will not be given to any product importers, traders, dealers, or distributors.

Documents Required for ISI / BIS Certification

The following documentation is required to get an ISI certification:

• Main Application Form V
• Address Proof of Manufacturing Unit
• Details of Manufacturing Process
• Test Report of products

For more detailed information, please click here.

Process of ISI / BIS Certification

There are two approaches for Indian manufacturers to become certified with the ISI Mark:

• Regular Procedure
• Simplified Procedure 

Regular Procedure

With the possible exception of cases deemed "All India first," which might take up to 180 days, the licensing procedure is expected to be finished in 120 days. This timeline starts on the day the application is received, assuming that at different points in time the documentation, unit assessment, and product conformance are all deemed acceptable.

Step 1: Manufacturing Unit Customization in Compliance with Applicable Indian Standards

• Identifying the applicable Indian Standard
• Establishing in-house testing facilities as per the Standard's requirements

Step 2: Submission of the Application Form

• Preparing an Internal Test Report for the product by the relevant Indian Standard
• Compiling all necessary documents
• Completing the Online Application Form
• Online payment of application fees directly to BIS
• Submitting hard copies of the Application Form with all enclosures to the relevant Branch Office (BO) of BIS

For more detailed information, please click here.

Simplified Procedure

This is a much faster process than the standard procedure. After a factory inspection is deemed satisfactory and the initial evaluation establishes that the sample complies with the applicable Indian Standard(s), the license application process is expected to be finished in 30 days.

Step 1: Adapting the Manufacturing Unit to Comply with the Relevant Indian Standard

• Identifying the applicable Indian Standard
• Establishing in-house testing facilities to meet the Standard's requirements

Step 2: Sample Testing

• Obtaining the necessary certificate for raw materials (Material Test Certificate - MTC)
• Conducting product sample testing at a BIS-recognized testing laboratory

For more detailed information, please click here

ISI Mark Certification Process for Foreign Manufacturers

The process of obtaining ISI Mark Certification for Foreign Manufacturers typically includes the following steps:

Step 1: Application

• Compile all the required documents.
• Submit the documents along with the Application Fee.
• An Application Number will be allotted.
• Scrutiny of the Application will be conducted within a specified time frame.​

Step 2: Query Raised (If Any)

• If any documents are missing or there is non-compliance, you will be informed.
• You need to submit a reply within the given timeframe.

​For more detailed information, please click here.

Why choose Brand Liaison?

Brand Liaison provides helpful support for achieving ISI Mark Certification. Among our offerings are:

•  Expert guidance
•  Streamline process
• Comprehensive support
• Cost-effective solutions
• Time efficient

Please click here to get in contact with our team of specialists for a deeper explanation of the paperwork and steps needed to get ISI Mark Certification.