Cement |
1 |
Ordinary Portland Cement |
IS 269: 2015 |
2 |
Sulphate Resisting Portland Cement |
IS 12330: 1988 |
3 |
Low Heat Portland Cement |
IS 12600: 1989 |
4 |
Portland Pozzolana Cement-Part1 Fly-ash based |
IS 1489 (Part-1):2015 |
5 |
Portland Pozzolana Cement-Part 2 Calcined clay based |
IS 1489 (Part-2): 2015 |
6 |
Masonry Cement |
IS 3466: 1988 |
7 |
Portland Slag Cement |
IS 455: 2015 |
8 |
High Alumina Cement for Structural Use |
IS 6452: 1989 |
9 |
Super Sulphated Cement |
IS 6909: 1990 |
10 |
Rapid Hardening Portland Cement |
IS 8041: 1990 |
11 |
White Portland Cement |
IS 8042: 2015 |
12 |
Hydrophobic Portland Cement |
IS 8043: 1991 |
13 |
Oil Well Cement |
IS 8229: 1986 |
14 |
Composite Cement-Specification |
IS 16415: 2015 |
15 |
Microfine Ordinary Portland Cement-Specification |
IS 16993: 2018 |
16 |
High Alumina Refractory Cement |
IS 15895: 2018 |
Household Electrical Goods |
17 |
PVC insulated cables for working voltages upto and including 1100 V |
IS 694:2010 |
18 |
Residual current operated circuit breakers for household and similar uses-Part 1 Circuit breakers without integral overcurrent protection (RCCBs) |
IS 12640 (Part-1): 2016 |
19 |
Residual current operated circuit breakers for household and similar uses-Part 2 Circuit breakers with integral overcurrent protection(RCVOs) |
IS 12640 (Part-2): 2016 |
20 |
AC watt-hour meters, class 0.5, 1 and 2 |
IS 13010: 2002 |
21 |
AC static watt-hour meters, class 1 and 2 |
IS 13779:2020 |
22 |
AC Static Transformer operated Watt-hour and VAR-hour meters, class 0.2S and 0.5S |
IS 14697:2021 |
23 |
Self Ballasted Lamps for General Lighting Services Part 1-Safety Requirements and Part 2-Performance Requirements |
IS 15111 (Part-1 & 2): 2002 |
24 |
Safety of household and similar electrical appliances-Electric iron |
IS 302 (Part-2/Sec-3): 2007 |
25 |
Electric immersion water heaters-Safety of household and similar electrical appliances |
IS 302 (Part-2/Sec-201): 2008 |
26 |
Electric stoves-Safety of household and similar electrical appliances |
IS 302 (Part-2/Sec-202): 1992 |
27 |
Room Heaters-Safety of household and similar electrical appliances |
IS 302 (Part-2/Sec-30): 2007 |
28 |
Switches for domestic and similar purposes |
IS 3854: 1997 |
29 |
Tungsten filament general service electric lamps (upto 100 W) |
IS 418: 2004 |
30 |
Electrical Accessories-Circuit breakers for overcurrent protection for household and similar installations |
IS/IEC 60898-1: 2015 |
31 |
Elastomer Insulated Cables (Part-1) for working voltages up to and including 1100 V |
IS 9968 (Part-1): 1988 |
Batteries |
32 |
Multi-purpose Dry Batteries ( Classification-R03, R6, R14 and R20 ) |
IS 8144: 2018 |
Food & Related Products |
33 |
Follow-up Formula Complementary Foods |
IS 15757: 2022 |
34 |
Processed cereal based complementary foods |
IS 11536: 2022 |
35 |
Milk Powder |
IS 1165: 2022 |
36 |
Condensed milk, partly skimmed and skimmed condensed milk |
IS 1166: 2022 |
37 |
Skimmed milk-powder, standard grade |
IS 13334 (Part-1): 2014 |
38 |
Skimmed milk-powder, extra grade |
IS 13334 (Part-2): 2014 |
39 |
Packaged Natural Mineral Water |
IS 13428: 2005 |
40 |
Infant milk substitutes |
IS 14433: 2022 |
41 |
Partly skimmed milk powder |
IS 14542: 1998 |
42 |
Packaged Drinking Water (Other than Packaged Natural Mineral Water) |
IS 14543: 2016 |
43 |
Milk-cereal based weaning foods |
IS 1656: 2022 |
44 |
Plastic Feeding Bottles |
IS 14625: 2015 |
45 |
Glass Feeding Bottles |
IS 5168: 2018 |
46 |
Food for Special Medical Purpose intended for Infants - Specification |
IS 17945: 2022 |
Oil Pressure Stoves |
47 |
Oil pressure stove, offset burner type |
IS 10109: 2018 |
48 |
Multi-burner oil pressure stoves |
IS 2787: 2006 |
49 |
Oil pressure stoves |
IS 1342: 2019 |
Automobile Accessories |
50 |
Automotive Vehicles Tubes for pneumatic tyres |
IS 13098: 2012 |
51 |
Automotive vehicles-Pneumatic tyres for two and three-wheeled motor vehicles |
IS 15627: 2022 |
52 |
Automotive vehicles-Pneumatic tyres for passenger car vehicles-Diagonal and radial ply |
IS 15633: 2022 |
53 |
Automotive vehicles-Pneumatic tyres for commercial vehicles-Diagonal and radial ply |
IS 15636: 2022 |
Cylinder, Valves and Regulator |
54 |
Liquefied petroleum gas containers for automotive usec |
IS 14899: 2014 |
55 |
Multifunction valve assembly for permanently fixed liquefied petroleum gas (LPG) containers for automotive use |
IS 15100: 2018 |
56 |
Welded low carbon steel cylinders exceeding 5 litre Water capacity for low pressure liquefiable gases Part 4 Cylinders for toxic and corrosive gases |
IS 3196 (Part-4): 2001 |
57 |
Welded low carbon steel gas cylinder exceeding 5 litre water capacity for low pressure liquefiable gases Part 1 Cylinders for LPG |
IS 3196 (Part-1): 2013 |
58 |
Welded low carbon steel gas cylinder exceeding 5-litre water capacity for low pressure liquefiable gases Part 2 Cylinders for liquefiable gases other than LPG |
IS 3196 (Part2): 2006 |
59 |
Valve fittings for compressed gas cylinder excluding liquefied petroleum gas cylinders |
IS 3224: 2021 |
60 |
Yoke Type Valve Connection for Small Medical Gas Cylinders |
IS 3745: 2006 |
61 |
Welded low carbon steel cylinders for low pressure liquefiable gases not exceeding 5 litre water capacity |
IS 7142: 1995 |
62 |
Refillable Seamless steel gas cylinders Part 1 Normalized steel cylinders |
IS 7285 (Part-1): 2018 |
63 |
Refillable Seamless steel gas cylinders Part 2 Quenched and tempered steel cylinders with tensile strength less than 1100 MPa |
IS 7285 (Part-2): 2017 |
64 |
Valve fittings for gas cylinder valves for use with breathing apparatus |
IS 7302: 2018 |
65 |
Welded and seamless steel dissolved acetylene gas cylinders |
IS 7312: 2018 |
66 |
Valve fittings for use with liquefied petroleum gas cylinders of more than 5 litre water capacity Part 2 Valve fittings for newly manufactured LPG cylinders |
IS 8737: 2017 |
67 |
Valve Fittings for Use with Liquefied Petroleum Gas (LPG) Cylinders upto and Including 5-Litre Water Capacity |
IS 8776: 1988 |
68 |
Low pressure regulators for use with liquefied petroleum gas (LPG) mixtures |
IS 9798: 2013 |
Medical Equipment |
69 |
Clinical thermometers Part 1-Solid stem type |
IS 3055 (Part-1): 1994 |
70 |
Clinical thermometers Part 2-Enclosed scale type |
IS 3055 (Part-2): 2004 |
71 |
Diagnostic Medical X Ray Equipment |
IS 7620 (Part-1): 1986 |
Steel and Iron Products |
72 |
Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement (Part 1) Mild steel and medium tensile steel bars |
IS 432 (Part 1):1982 |
73 |
Mild steel and Medium Tensile steel bars and Hard-Drawn Steel Wire for Concrete Reinforcement (Part 2) Hard-Drawn Steel Wire |
IS 432 (Part 2): 1982 |
74 |
Stainless Steel Bars and Flats |
IS 6603: 2001 |
75 |
Bright steel bars-Specification |
IS 9550:2001 |
76 |
Specification for High Tensile Steel Bars used in Pre-stressed Concrete |
IS 2090:1983 |
77 |
Chrome molybdenum steel bars and rods for aircraft purposes |
IS 963: 1958 |
78 |
Steel Wire for Nipples for Spokes |
IS 8564: 1977 |
79 |
Stress-Relieved, Low Relaxation Steel Wire for Pre-stressed Concrete |
IS 16644: 2018 |
80 |
Trapezoidal Steel Wire for Springs Washers |
IS 12262:1988 |
81 |
Plain Hard-drawn Steel Wire For Pre-stressed Concrete Part 1 Cold Drawn Stress-relieved Wire |
IS 1785 (Part 1) : 1983 |
82 |
Plain hard-drawn steel wire for pre-stressed concrete Part 2 as drawn wire |
IS 1785 (Part 2) : 1983 |
83 |
Mild steel wire rods for general engineering purposes |
IS 7887:1992 |
84 |
Mild steel wire for cotter pins |
IS 10794:1984 |
85 |
Steel Wire for Reeds |
IS 8566: 1977 |
86 |
Half Round Mild Steel Wire for The Manufacture of Split Pins |
IS 8563: 1977 |
87 |
Tinned Steel Wire for Banding of Armatures And Rotors Part-3 Specific Requirements for non-magnetic banding wires |
IS 8510 (PartIII): 1977 |
88 |
Steel Wire for Banding Of Armatures And Rotors Part-2 Specific Requirements for magnetic banding wires |
IS 8510 (Part II): 1977 |
89 |
Hard Drawn Steel Wire for Upholstery Springs |
IS 2589: 1975 |
90 |
High Carbon Steel Wire Rods |
IS 7904:2017 |
91 |
Mild steel wire for General Engineering purposes |
IS 280: 2006 |
92 |
Round Steel wire for ropes |
IS 1835:1976 |
93 |
Low Carbon Galvanized steel wires formed wires and Tapes for armouring of Cables |
IS 3975:1999 |
94 |
Steel wire for mechanical springs Part-1 cold drawn unalloyed steel wire |
IS 4454 (Part 1) : 2001 |
95 |
Steel wire for mechanical springs Part-2 oil hardened and tempered steel wire |
IS 4454 (Part 2): 2001 |
96 |
Stainless Steel wire Rod |
IS 6527:1995 |
97 |
Stainless Steel Wires |
IS 6528:1995 |
98 |
Specification for Mild Steel Wire, Cold Heading Quality |
IS 1673: 1984 |
99 |
Specification for Carbon Steel Wire for the Manufacture of Wood Screws |
IS 1812: 1982 |
100 |
Specification for Mild Steel Wire Rod for the Manufacture of Machine Screws |
IS 2255: 1977 |
101 |
Specification for Steel Wire for Umbrella Ribs |
IS 4223: 1975 |
102 |
Specification for Steel Wire for Staples, Pins and Clips |
IS 4224: 1972 |
103 |
Specification for Steel Wire for spokes |
IS 6902: 1973 |
104 |
Specification for Steel Wire ( up to 20 mm ) for the manufacture of cold-forged rivets |
IS 7557: 1982 |
105 |
Steel Cast Billet Ingots, Billets and Blooms for production of High Carbon Steel Wire Rods-Specification |
IS 8951: 2001 |
106 |
Steel ingots, blooms and billets for production of mild steel wire rods for general engineering purposes-Specification |
IS 8952: 1995 |
107 |
Specification for Steel Wire for Needles |
IS 9962: 1981 |
108 |
Specification for Low Carbon Steel Wire for Rivets for use in Bearing Industry |
IS 4882: 1979 |
109 |
Specification for Hard-drawn Steel Wire Fabric for Concrete Reinforcement |
IS 1566:1982 |
110 |
Steel Wires for Mechanical Springs Part-4 Stainless Steel Wire |
IS 4454 (Part 4): 2001 |
111 |
Steel tubes for structural purposes |
IS 1161:2014 |
112 |
Steel Tubes, Tubulars and Other Wrought Steel Fittings Part 1-Steel Tubes |
IS 1239 (Part 1): 2014 |
113 |
Steel tubes used for water-wells (upto 200 mm dia) |
IS 4270:2001 |
114 |
Fusion bonded epoxy coated reinforcing bars |
IS 13620:1993 |
115 |
Galvanized steel sheets (plain and corrugated) |
IS 277:2003 |
116 |
Uncoated Stress Relieved Low Relaxation Seven-ply Strand For Pre-stressed Concrete |
IS 14268:1995 |
117 |
Indented wire for Pre-stressed concrete |
IS 6003:2010 |
118 |
Uncoated stress relieved strand for Pre-stressed concrete |
IS 6006:2014 |
119 |
Oriented Electrical Steel Sheet and Strip Semi-Processed Type |
IS 15391:2003 |
120 |
Steel plates for pressure vessels for intermediate and high temperature service including boilers |
IS 2002:2009 |
121 |
Steel plates for pressure vessels used at moderate and low temperature |
IS 2041:2009 |
122 |
Hot rolled medium and high tensile structural steel |
IS 2062:2011 |
123 |
Carbon steel cast billet ingots, billets, blooms and slabs for rerolling into steel for general structural purpose |
IS 2830:2012 |
124 |
Cold rolled non-oriented electrical steel sheets and strip-fully processed type (CRNO) |
IS 648:2006 |
125 |
Grain oriented electrical steel sheet and strip (CRGO) |
IS 3024:2015 |
126 |
Centrifugally cast (spun) ductile iron pressure pipes for water, gas and sewage |
IS 8329 : 2000 |
127 |
Ductile iron fittings for pressure pipes for water, gas and sewage |
IS 9523:2000 |
128 |
Mild steel for metal arc welding electrodes |
IS 2879:1998 |
129 |
Steel Chequered Plates |
IS 3502:2009 |
130 |
Hot Rolled Steel Plate (upto 6 mm) Sheet and Strip for the Manufacture of Low Pressure Liquefiable Gas Cylinders |
IS 6240: 2008 |
131 |
Hot rolled steel narrow width strip for welded tubes and pipes |
IS 15647:2006 |
132 |
Cold reduced carbon steel sheets and strips Part 1 Cold Forming and Drawing Purpose |
IS 513 (Part-1): 2016 |
133 |
Hot Rolled Carbon Steel Sheet and Strip |
IS 1079: 2017 |
134 |
Carbon steel billets, blooms, slabs and bars for forgings |
IS 1875:1992 |
135 |
Hot Rolled Steel Flat Products for Structural Forming and Flanging Purposes |
IS 5986: 2017 |
136 |
Hot Rolled bars for production of bright bars and machined parts for engineering applications |
IS 7283:1992 |
137 |
Hot Rolled Steel Strip for Welded Tubes and Pipes |
IS 10748:2004 |
138 |
Hot Rolled Carbon Steel Strip For Cold Rolling Purposes |
IS 11513:2017 |
139 |
Continuously Pre-Painted Galvanized Steel Sheet and Coils |
IS 14246:2013 |
140 |
Pre-Painted Aluminium Zinc Alloy Metallic Coated Steel Strip and Sheet (Plain) |
IS 15965:2012 |
141 |
Stainless Steel Sheets and Strips for Utensils |
IS 5522:2014 |
142 |
Stainless Steel Plate, Sheet and Strip-Specification |
IS 6911:2017 |
143 |
Low Nickel Austenitic Stainless Steel Sheet and Strip for Utensils and Kitchen Appliances-Specification |
IS 15997:2012 |
144 |
Cold reduced carbon steel sheets and strips Part 2 High Tensile and Multi-phase Steel |
IS 513(Part-2):2016 |
145 |
Alloy Steel billets, blooms and slabs for forging for general engineering purposes |
IS 4368:1967 |
146 |
Steels for Cold Heading or Cold extrusion application Part-1 Wrought carbon and low alloy steels |
IS 11169 (Part 1): 1984 |
147 |
Structural Weather Resistant Steel |
IS 11587:1986 |
148 |
Fire resistant Steel-Specification |
IS 15103: 2002 |
149 |
Hot Dip aluminum-Zinc alloy metallic coated steel strip and sheet (Plain) |
IS 15961:2012 |
150 |
Structural Steel for Building for Structures with improved seismic Resistance |
IS 15962:2012 |
151 |
Ferrosilicon-Specification |
IS 1110 : 2023 |
152 |
Specification for Ferronickel |
IS 4409 : 2023 |
153 |
Specification for Hot rolled steel strip (bailing) |
IS 1029 : 1970 |
154 |
Specification for Hot-rolled mild steel sheet and strip in coil form for cold-reduced tinplate and cold-reduced black plate |
IS 2385 : 1977 |
155 |
Specification for Structural steel for construction of hulls of ships |
IS 3039 : 1988 |
156 |
Tool steels-Specification |
IS 3748 : 2022 |
157 |
Steel for hardening and tempering-Specification |
IS 5517 : 1993 |
158 |
Alloys for Internal Combustion Engine Valve Applications - Specification |
IS 7494 : 2023 |
159 |
Specification for Carbon manganese steel forgings for pressure vessels |
IS 12146 : 1987 |
160 |
Magnetic materials-specification for individual material-Fe based amorphous strip delivered in the semi-processed state |
IS 16585 : 2023 |
161 |
Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (ordinary quality)-Specification |
IS 2831 : 2012 |
162 |
Steel Rivet Bars (Medium and High Tensile) for Structural Purposes |
IS 1148: 2009 |
163 |
Stampings / laminations / cores of transformers (with or without winding) made from-Grain Oriented Electrical Steel Sheet and Strip or Cold Rolled Non-oriented Electrical Steel Sheet and Strip ( Scheme-IV ) |
IS 3024/IS 648 |
164 |
Steel For the Manufacture of Volute And Helical Springs ( for Railway Rolling Stock )-Specification |
IS 3195: 1992 |
165 |
Steel for the manufacture of Laminated Springs ( Railway Rolling Stock ) Part-1 Flat Sections-Specification |
IS 3885-Part-1: 1992 |
166 |
Specification for Steel for the manufacture of volute, helical and laminated springs for automotive suspension |
IS 3431: 1982 |
167 |
Steel for the manufacture of Laminated Springs ( Railway Rolling Stock ) Part-2 Rib and Groove Sections-Specification |
IS 3885-Part- 2: 1992 |
168 |
Cold-rolled Carbon Steel Strips for Ball and Roller Bearing Cages or Retainers-Specification |
IS 4397: 1999 |
169 |
Carbon-chromium Steel for the Manufacture of Balls, Rollers and Bearing Races-Specification |
IS 4398: 1994 |
170 |
Specification for Steel For Electrically Welded Round Link Chains |
IS 6967: 1973 |
171 |
Specification for Cold rolled medium, high carbon and low alloy steel strip for general engineering purposes |
IS 7226: 1974 |
172 |
Steel ingots, billets and blooms for the production of springs, rivets and screws for general engineering applications-Specification |
IS 8052: 2006 |
173 |
Specification for Cold rolled steel strips for carbon steel razor blades |
IS 9476: 1980 |
174 |
Steels for High Temperature Bolting Applications-Specification |
IS 14331:1995 |
175 |
Low carbon high strength cold rolled steel sheets and coils for cold forming-Specification |
IS 14491:1997 |
176 |
Stainless Steel Blooms Billets and Slabs for Forging |
IS 6529:1996 |
177 |
Cold-Rolled Stainless Steel Strips for Razor Blades |
IS 9294:2023 |
178 |
Stainless Steel for Welding Electrode Core Wire |
IS 10631:1983 |
179 |
Non-Magnetic stainless steel for electrical applications Part-2 Specific requirements for binding wire |
IS 10632 (Part 2): 1983 |
180 |
Non-Magnetic stainless steel for electrical applications Part-3 Specific requirements for sheets, strips and plates |
IS 10632 (Part 3):1983 |
181 |
Steels for cold heading or cold extrusion applications-Specification Part-2 Stainless steel |
IS 11169 (Part 2): 1989 |
182 |
Steels for Pneumatic Tools |
IS 5651:1987 |
183 |
Heat Resisting Steels |
IS 9516:1980 |
184 |
Steels For Piston Pins ( Gudgeon Pins ) |
IS 11952:1986 |
185 |
Alloys used in Electrical Resistance Metallic Heating Elements |
IS 12045:1987 |
186 |
18 Percent Nickel Maraging Steel Bars and Rods |
IS 14652: 1999 |
187 |
Soft Magnetic Iron Strips |
IS 11946:1987 |
188 |
Soft Magnetic Iron Rods, Bars Flats and Sections |
IS 11947: 1987 |
189 |
Cold-reduced Electrolytic Tin Plate |
IS 1993 : 2018 |
190 |
Cold-reduced Electrolytic Chromium or Chromium oxide-coated steel |
IS 12591: 2018 |
191 |
Malleable iron shots and grits for use in foundries-Specification |
IS 9139: 2023 |
192 |
Expanded Metal Steel Sheets For General Purposes |
IS 412: 1975 |
193 |
Steel Billets, Bars and Sections For Boilers |
IS 2100: 1970 |
194 |
Mild Steel Rivet Bars for Ship Building |
IS 3298: 1981 |
195 |
Steel for Spring Washers |
IS 4072: 1975 |
196 |
Heald Wire |
IS 8565: 1977 |
197 |
Plates for Galvanizing Pots |
IS 8917: 1978 |
198 |
Hot Rolled Steel Plates Sheets and Strips for Manufacture of Agricultural Discs |
IS 9442: 1980 |
199 |
Cold-Reduced And Hot-Rolled Carbon Steel Sheet for Porcelain Enamelling |
IS 9485: 1980 |
200 |
Structural Steel (Ordinary Quality) |
IS 15911:2010 |
201 |
Carbon and Carbon-Manganese Free-Cutting Steels |
IS 4431: 1978 |
202 |
Case Hardening Steels |
IS 4432: 1988 |
203 |
Steels for Die Blocks for Drop Forging |
IS 5518: 1996 |
204 |
Forged or Rolled CTC Segments |
IS 8748: 1978 |
205 |
Quenched and Tempered Alloy Steel Forgings for Pressure Vessels |
IS 12145: 1987 |
206 |
Tool Steel Forgings for Metal Forming |
IS 13387: 1992 |
207 |
Carbon and Low Alloy Billets, Blooms, Slabs and Bars for Manufacture of Shell Bodies and Proof Shots Used In Defence Servicess |
IS 14698:1999 |
208 |
Cold-Reduced tinmill products-Blackplate |
IS/ISO 11951 : 2016 |
209 |
Flame and Induction Hardening Steels |
IS 3930: 1994 |
210 |
Thermostat Metal Sheet and Strip |
IS 5478: 1969 |
211 |
Stock for Forgings produced from Continuously Cast Blooms, Billets and Slabs |
IS 13352: 1992 |
212 |
Electrogalvanized Hot Rolled and Cold Reduced Carbon Steel Sheets and Strips |
IS 17404 : 2020 |
213 |
Bead Wires for Tyres |
IS 4824:2006 |
214 |
High Tensile Strength Flat Rolled Steel Plate (Up to 6 mm), Sheet and Strip for the Manufacture of Welded Gas Cylinder |
IS 15914:2011 |
215 |
Specification for Cold-rolled Steel Strips For Springs |
IS 2507: 1975 |
216 |
High strength deformed steel bars and wires for concrete reinforcement - Specification |
IS 1786:2008 |
217 |
Cold Rolled Steel Strips (Box Strappings) |
IS 5872:1990 |
218 |
Galvanized Structural Steel |
IS 16732:2019 |
219 |
Heat-Treated Steels Alloy and Free-Cutting Steels-Ball and Roller Bearing Steels |
IS 17111:2019 (ISO 683-17:2014) |
220 |
Hot-dip Zinc Coating on Structural Steel Bars for Concrete Reinforcement |
IS 12594: 1988 |
221 |
Unalloyed And Alloyed Steel Ingot And Semi-Finished Products For Re-Rolling Purposes |
IS 14650:2023 |
222 |
Ferrochromium |
IS 1170:1992 |
223 |
Silicomanganese |
IS 1470: 2013 |
224 |
Ferromanganese |
IS 1171:2011 |
Electrical Transformers |
225 |
Outdoor Type Door Oil Immersed Distribution Transformers upto and including 2500 kVA, 33 kV-Specification Part 1 Mineral Oil Immersed |
IS 1180 (Part 1): 2014 |
Electrical Motors |
226 |
Energy Efficient Induction Motors-Three Phase Squirrel Cage |
IS 12615 : 2018 |
Capacitors |
227 |
Power Capacitors of Self-Healing Type for AC Power Systems having Rated Voltage upto 1000V |
IS 13340 (Part 1) : 2012 |
228 |
Shunt Power Capacitors of the Non-Self Healing Type for AC System having A Rated Voltage upto and including 1000 V Part 1 General Performance Testing and Rating |
IS 13585 (Part-1): 2012 |
229 |
AC Motor Capacitors |
IS 2993: 1998 |
Chemicals, Fertilizers, Polymers & Textiles |
230 |
Caustic Soda-Specification |
IS 252:2013 |
231 |
Boric Acid-Specification |
IS 10116: 2015 |
232 |
Poly Aluminium Chloride |
IS 15573: 2018 |
233 |
Acetic Acid |
IS 695: 2020 |
234 |
Aniline, Technical |
IS 2833: 2019 |
235 |
Methanol (Methyl Alcohol) |
IS 517: 2020 |
236 |
Specification for Phthalic Anhydride, Technical |
IS 5158: 1987 |
237 |
Pyridine |
IS 8058: 2018 |
238 |
Gamma Picoline |
IS 16113: 2013 |
239 |
Beta Picoline |
IS 16112: 2013 |
240 |
Morpholine |
IS 12084:2018 |
241 |
Sodium Sulphide, Technical |
IS 297: 2001 |
242 |
Potassium Carbonate, Anhydrous |
IS 7129: 2021 |
243 |
Acetone |
IS 170: 2020 |
244 |
Phosphorous Trichloride, Pure and Analytical Reagent |
IS 4581:2021 |
245 |
Phosphorous Pentachloride, Technical |
IS 11744: 2020 |
246 |
Phosphorous Oxychloride, Technical |
IS 11657: 2020 |
247 |
Stabilized Hydrogen Peroxide |
IS 2080: 2021 |
248 |
Precipitated Barium Carbonate, Technical |
IS 3205:1984 |
249 |
Precipitated Barium for Ceramic and Glass Industry |
IS 12928:1990 |
250 |
Sodium Formaldehyde Sulphoxylate |
IS 4505:2015 |
251 |
Sodium Tripolyphosphate, Anhydrous, Technical |
IS 6100:2021 |
252 |
n-Butyl Acrylate |
IS 14709:1999 |
253 |
Ether |
IS 336:2021 |
254 |
Ethylene Glycol |
IS 5295:2023 |
255 |
Toluene |
IS 537:2011 |
256 |
Terephthalic Acid |
IS 15030:2022 |
257 |
Methyl Acrylate |
IS 14707:1999 |
258 |
Ethyl Acrylate |
IS 14708:1999 |
259 |
Vinyl Acetate Monomer |
IS 12345:1988 |
260 |
Styrene (Vinyl Benzene) |
IS 4105:2023 |
261 |
Maleic Anhydride, Technical |
IS 5149:2020 |
262 |
Acrylonitrile |
IS 12540:2023 |
263 |
100 Percent Polyester Spun Grey and White Yarn (PSY) |
IS 17265:2023 |
264 |
Polyester Continuous Filament Fully Drawn Yarn (FDY) |
IS 17261:2022 |
265 |
Polyester Industrial Yarn (IDY) |
IS 17264:2022 |
266 |
Polyester Partially Oriented Yarn (POY) |
IS 17262:2022 |
267 |
Polyester Staple Fibres (PSF) |
IS 17263:2022 |
268 |
Polyethylene Material for moulding and extrusion for LDPE, LLDPE and HDPE |
IS 7328:2020 |
269 |
Styrene-Butadiene Rubber Latex |
IS 11356:2020 |
270 |
Linear Alkyl Benzene |
IS 12795:2020 |
271 |
Synthetic Micro-Fibres for use in Cement Based Matrix |
IS 16481:2020 |
272 |
Ethylene Vinyl Acetate (EVA) Copolymers |
IS 13601:1993 |
273 |
3(N, N-DiEthyl) Aminophenol |
IS 7686:2020 |
274 |
Methylene Chloride (Dichloromethane) |
IS 4566:2020 |
275 |
Red Phosphorus |
IS 2012:2006 |
276 |
Acrylonitrile Butadiene Styrene (ABS) |
IS 17077:Part 1:2022 |
277 |
Ethylene Dichloride |
IS 869:2020 |
278 |
p-Xylene |
IS 17370:2023 |
279 |
Polycarbonate Moulding And Extrusion Materials Specification |
IS 14434:2023 |
280 |
Plastics-Thermoplastic Polyurethanes for Moulding and Extrusion-Part 1 Designation System |
IS 17397 : Part 1 : 2022 |
281 |
Vinyl Chloride Monomer |
IS 17442:2020 |
282 |
1,3 Phenylenediamine |
IS 17450:2020 |
283 |
Lauric Acid |
IS 10931:1984 |
284 |
Acid Oil |
IS 12029:1986 |
285 |
Palm Fatty Acids |
IS 12067:1987 |
286 |
Rice Bran Fatty Acids |
IS 12068:1987 |
287 |
Coconut Fatty Acids |
IS 12069:1987 |
288 |
Rubberseed Fatty Acids |
IS 12124:1987 |
289 |
Hydrogenated Rice Bran Fatty Acids |
IS 12361:1988 |
Kitchen Appliances |
290 |
Hand held Blender |
IS 302(Part2/Section 14):2009 |
291 |
Domestic Electric Food Mixer (Liquidizers and Grinders) and Centrifugal Juicer |
IS 4250:1980 |
Domestic Water Heaters for use with LPG |
292 |
Instantaneous Domestic Water Heater for use with Liquefied Petroleum Gas |
IS 15558:2005 |
Air Conditioner and its related Parts, Hermetic Compressor and Temperature Sensing Controls |
293 |
Room Air Conditioners-Specification Part 1 Unitary Air Conditioners |
IS 1391 (Part-1):2023 |
294 |
Room Air Conditioners-Specification Part 2 Split Air Conditioners |
IS 1391 (Part-2):2023 |
295 |
Ducted and Package Air Conditioners |
IS 8148:2018 |
296 |
Finned type Heat Exchanger for Room Air Conditioner |
IS 11329:2018 |
297 |
Hermetic Compressor-Specification |
IS 10617:2018 |
Plugs and Socket-Outlets and Alternating Current Direct Connected Static Prepayment Meters for Active Energy |
298 |
Plugs and socket-outlets of Rated Voltage up to and including 250 Volts and Rated current up to and including 16 amperes |
IS 1293:2019 |
299 |
Alternating Current Direct Connected Static Prepayment Meters for Active Energy (Class 1 and 2) |
IS 15884:2010 |
Domestic Gas Stoves for use with Liquefied Petroleum Gases |
300 |
Domestic Gas Stoves for use with Liquefied Petroleum Gases |
IS 4246:2002 |
Transparent Float Glass |
301 |
Transparent Float Glass |
IS 14900: 2018 |
Domestic Pressure Cooker |
302 |
Domestic Pressure Cooker |
IS 2347:2017 |
Cables |
303 |
Specification for PVC Insulated (Heavy Duty) Electric Cables Part 1 For Working Voltages up to and Including 1100V |
IS 1554:Part 1:1988 (Reaffirmed Year : 2020 ) |
304 |
Specification for PVC Insulated (Heavy Duty) Electric Cables Part 2 For Working Voltages from 3.3 kV up to and Including 11kV |
IS 1554(Part 2):1988 |
305 |
Crosslinked polyethylene insulated Thermoplastics sheathed cables-Specification Part 2 for working voltages from 3.3 kV up to and including 33 kV |
IS 7098 (Part 2):2011 |
306 |
Cross-linked polyethylene insulated Thermoplastics sheathed cables-Part 3 For Working Voltages from 66kV up to and including 220 kV |
IS 7098 (Part 3):1993 |
307 |
Aerial Bunched Cables-For Working Voltages Up to and Including 1100 Volts-Specification |
IS 14255:1995 |
308 |
Specification for Elastomer Insulated Cables Part 2 For Working Voltages form 3.3kV Up to and Including 33kV |
IS 9968 (Part 2):2002 |
309 |
Specification for Thermocouple Compensating Cables |
IS 8784:1987 |
310 |
Welding Cables-Specification |
IS 9857:1990 |
311 |
Elastomer Insulated Flexible Cables for Use in Mines-Specification |
IS 14494:2019 |
312 |
Specification for Flexible Cables for Miners Cap-Lamps |
IS 2593:1984 |
313 |
Specification for Shot Firing Cables (for use other than in sharts) |
IS 5950:1984 |
314 |
Halogen Free Flame Retardant (HFFR) Cables for Working Voltages Up to and Including 1100 V-Specification |
IS 17048:2018 |
315 |
Crosslinked Polyethylene Insulated PVC Sheathed Cables Part 1 for working voltages up to and including 1100 V |
IS 7098 (Part 1):1988 |
Rubber Hose for Liquefied Petroleum Gas (LPG) |
316 |
Rubber Hose for Liquefied Petroleum Gas (LPG)-Specification Part 1 Industrial Application |
IS 9573(Part 1):2017 |
317 |
Rubber Hose for Liquefied Petroleum Gas (LPG)-Specification Part 2 Domestic and Commercial Application |
IS 9573(Part 2):2017 |
Aluminium Foil |
318 |
Aluminium and Aluminium Alloy Bare Foil for Food Packaging |
IS 15392:2003 |
Non-Electric Toys |
319 |
Non-Electric Toys |
IS 9873 (Part-1):2019, IS 9873 (Part-2):2017, IS 9873 (Part-3):2020, IS 9873 (Part-4):2017, IS 9873 (Part-7):2017, IS 9873 (Part-9):2017 |
Electric Toys |
320 |
Electric Toys |
IS 15644:2006 |
Flat Transparent Sheet Glass |
321 |
Flat Transparent Sheet Glass |
IS 2835:1987 |
Safety Glass |
322 |
Safety Glass-Specification Part-1 Architectural, Building and General uses |
IS 2553 (Part-1):2018 |
323 |
Safety Glass-Specification Part-2 For Road Transport |
IS 2553 (Part-2):2019 |
Woven Sacks |
324 |
HDPE or PP Woven Sacks for packaging 50 kg Food Grains |
IS 14887:2014 |
325 |
HDPE or PP Woven Sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg Food Grains |
IS 16208:2015 |
326 |
HDPE or PP Woven Sacks for packaging 50 kg or 25 kg Sugar |
IS 14968:2015 |
327 |
HDPE or PP Woven Sacks for filling Sand |
IS 14252:2015 |
Butterfly Valves |
328 |
Butterfly Valves for general purpose |
IS 13095:2020 |
Reflectors for Bicycles |
329 |
Retro-reflective Devices |
IS/ISO 6742 (Part-2):2015 |
Paper |
330 |
Plain Copier Paper |
IS 14490:2018 |
Cattle Feeds |
331 |
Compounded Feeds for Cattle |
IS 2052:2023 |
Automobile Wheel Rim Component |
332 |
Light Alloy Wheel Rims |
IS 16192 (Part-1):2014 |
333 |
Sheet Metal Wheel Rims |
IS 16192 (Part-2):2014 |
334 |
Spoke Wheel Rims |
IS 16192 (Part-3):2018 |
335 |
Wheels for Passenger Cars |
IS 9436:2018 |
336 |
Wheels or Rims for Trucks and Buses |
IS 9438:2018 |
Footwear |
337 |
Personal protective equipment Part-4 Occupational Footwear |
IS 15298 (Part-4):2017 |
338 |
Personal protective equipment Part-3 Protective Footwear |
IS 15298 (Part-3):2018 |
339 |
Personal protective equipment Part-2 Safety Footwear |
IS 15298 (Part-2):2016 |
340 |
Sports footwear |
IS 15844:2010 |
341 |
Leather safety footwear with direct moulded polyvinyl chloride (PVC) sole |
IS 14544:2022 |
342 |
Leather safety footwear having direct moulded rubber sole |
IS 11226:1993 |
343 |
Moulded plastics footwear-Lined or Unlined polyurethane boots for general industrial use |
IS 16645:2018 |
344 |
Footwear for men and women for municipal scavenging work |
IS 16994:2018 |
345 |
Industrial and protective rubber knee and ankle boots |
IS 5557:2004 |
346 |
Moulded solid rubber soles and heels |
IS 5676:1995 |
347 |
Rubber microcellular sheets for soles and heels |
IS 6664:1992 |
348 |
Solid PVC soles and heels |
IS 6719:1972 |
349 |
PVC sandal |
IS 6721:2023 |
350 |
Rubber Hawai Chappal |
IS 10702:2023 |
351 |
Polyvinyl chloride(PVC) industrial boots |
IS 12254:2021 |
352 |
Polyurethane sole, semirigid |
IS 13893:1994 |
353 |
Unlined moulded rubber boots |
IS 13995:1995 |
354 |
Leather safety boots and shoes for miners |
IS 1989 (Part-1):1986 |
355 |
Canvas Shoes Rubber Sole |
IS 3735:1996 |
356 |
Canvas Boots Rubber Sole |
IS 3736:1995 |
357 |
Safety Rubber Canvas Boots for Miners |
IS 3976:2018 |
358 |
Antiriot shoes |
IS 17037:2018 |
359 |
Derby shoes |
IS 17043:2018 |
360 |
Slipper, rubber |
IS 11544:1986 |
361 |
High ankle tactical boots with PU-Rubber sole |
IS 17012:2018 |
362 |
All rubber gum boots and ankle boots |
IS 5557 (Part 2):2018 |
363 |
Leather safety boots and shoes for heavy metal industries |
IS 1989 (Part 2):1986 |
Press Tool-Punches |
364 |
Tools for Pressing Part-3 Round Punches with 60 Degrees Conical Head and Reduced Shank |
IS 4296:Part 3:2015 |
365 |
Tools for Pressing Part-2 Punches with Cylindrical Head and Straight or Reduced Shank |
IS 4296:Part 2:2015 |
366 |
Tools for Pressing Part-1 Round Punches with 60 Degrees Conical Head and Straight Shank |
IS 4296:Part 1:2016 |
Helmet for riders of Two Wheeler Motor Vehicles |
367 |
Helmet for riders of Two Wheeler Motor Vehicles |
IS 4151:2015 |
Refrigerating Appliances |
368 |
Household Refrigerating Appliances-Characteristics and Test Methods Part-1 General Requirements |
IS 17550:Part 1:2021 |
369 |
Freezers |
IS 7872:2020 |
Centrifugally cast (Spun) iron pipes |
370 |
Centrifugally cast (Spun) iron pressure pipes for water, gas and sewage |
IS 1536:2023 |
371 |
Centrifugally cast (Spun) iron spigot and socket soil, waste, ventilating and rainwater pipes, fittings and accessories |
IS 3989:2009 |
372 |
Hubless centrifugally cast (Spun) iron pipes, fittings and accessories-Spigot series |
IS 15905:2011 |
Flux Cored (Tubular) Electrodes |
373 |
Flux Cored (Tubular) Electrodes for Gas Shielded and Self-Shielded Metal Welding of Carbon or Carbon- Manganese Steel |
IS 15769:2008 |
Sewing Machine |
374 |
Household Zig-Zag Sewing Machine Head |
IS 15449:Part1:2004 |
Water Treatment System |
375 |
Reverse Osmosis (RO) Based Point-Of-Use (POU) Water Treatment System |
IS 16240:2023 |
Jute Bag |
376 |
A- twill Jute Bag |
IS 1943:1995 |
377 |
B-twill Jute bags for packing foodgrains |
IS 2566:1993 |
378 |
Jute bags for packing 50 Kg foodgrains |
IS 12650:2018 |
379 |
Jute bags for packing 50 Kg sugar |
IS 15138:2010 |
380 |
Light weight jute sacking bags for packing 50 Kg foodgrains |
IS 16186:2014 |
381 |
Jute bags for packing up to 30 Kg foodgrains |
IS 16372:2015 |
382 |
Viscose Staple Fibres |
IS 17266:2019 |
383 |
Laminated High Density Polyethylene (HDPE) Woven Geomembrane for Water Proof Lining |
IS 15351:2015 |
384 |
Poly Vinyl Chloride (PVC) Geomembranes |
IS 15909 : 2020 |
385 |
Needle punched non-woven geobags |
IS 16653:2017 |
386 |
Polypropylene Multifilament woven geobags |
IS 16654:2017 |
387 |
Jute Geotextiles Part 1 Strengthening of Sub-Grade in Roads |
IS 14715 (Part 1): 2016 |
388 |
Jute Geotextiles Part 2 Control of Bank Erosion in Rivers and Waterways |
IS 14715 (Part 2): 2016 |
389 |
Open Weave Coir Bhoovastra |
IS 15869 : 2020 |
390 |
Geotextiles used in sub-grade separation in pavement structures |
IS 16391 : 2015 |
391 |
Geotextiles used in Subsurface Drainage Application |
IS 16393 : 2015 |
392 |
Geotextiles used in Sub-grade Stabilisation in pavement structures |
IS 16362:2020 |
393 |
High Density Polyethylene (HDPE) Geomembranes for lining |
IS 16352 : 2020 |
394 |
Geotextiles for permanent erosion control in hard armor systems |
IS 16392 : 2015 |
395 |
Geogrids for flexible pavements |
IS 17371:2020 |
396 |
Polymeric strip or geostrip used as soil reinforcement in retaining structures |
IS 17372:2020 |
397 |
Geogrids used in reinforced soil retaining structures |
IS 17373:2020 |
398 |
Reinforced HDPE membrane for effluents and chemical resistance lining |
IS 17374:2020 |
399 |
Geosynthetics - Geocells - Specification Part 1 Load Bearing Application |
IS 17483 (Part 1): 2020 |
400 |
Geosynthetics - Geocells - Specification Part 2 Slope Erosion Protection Application |
IS 17483 (Part 2): 2020 |
401 |
Geotextiles used as protection (or cushioning) materials |
IS 16090:2013 |
402 |
Curtains and Drapes |
IS 15741: 2007 |
403 |
Upholstered composites used for non-domestic furniture |
IS 15768 : 2008 |
404 |
Protective clothing for firefighters |
IS 16890 : 2018 |
405 |
Protective gloves for firefighters |
IS 16874 : 2018 |
406 |
Protective clothing for industrial workers exposed to heat |
IS 15748 : 2022 |
407 |
Clothing made of limited flame spread materials and material assemblies affording protection against heat and flame |
IS 15742 : 2007 |
408 |
High visibility Warning Clothes |
IS 15809 : 2017 |
409 |
Protective Clothing for use in welding and allied processes |
IS 16655 : 2017 |
410 |
Tactical 3 point sling |
IS 16725 : 2018 |
411 |
Pouch for ammunition and grenades made of disruptive pattern nylon-66 |
IS 16726 : 2018 |
412 |
Water-proof multipurpose rain poncho |
IS 17286 : 2019 |
413 |
Lighters- Safety Specifications |
IS/ISO 9994:2018 |
414 |
Utility Lighters – Safety Specifications |
IS/ISO 22702:2018 |
415 |
Potable Water Bottles (Copper, Stainless Steel, Aluminum) |
IS 17803: 2022 |
416 |
Covered electrodes for manual metal arc welding of carbon and carbon manganese steel |
IS 814 : 2004 |
417 |
Welding rode and bare electrodes for gas shielded arc welding of structural steel |
IS 6419 : 1996 |
418 |
A.C. Static Direct Connected Watt Hour Smart Meter Class 1 and 2 |
IS 16444 : Part 1 : 2015 |
419 |
A.C. Static Transformer Operated Watt Hour and Var-Hour Smart Meters, Class 0.2S, 0.5S and 1.0S |
IS 16444:Part 2:2017 |
420 |
Insulated Flask for Domestic Use |
IS 17790 : 2022 |
421 |
Domestic Stainless steel vacuum flask/bottle |
IS 17526:2021 |
422 |
Insulated Container for Food Storage |
IS 17569:2021 |
423 |
Resin treated compressed wood laminates (compregs) – For electrical purposes |
IS 3513 (Part 1) : 1989 |
424 |
Resin treated compressed wood laminates (compregs) – For chemical purposes |
IS 3513 (Part 2) : 1989 |
425 |
Resin treated compressed wood laminates (compregs) – For general purposes |
IS 3513 (Part 3) : 1989 |
426 |
Hexagon Head Bolts, Screws and Nuts of product Grade C Hexagon Head Bolts (Size Range M 5 to M 64) |
IS 1363 (Part 1) :2019 |
427 |
Hexagon Head Screw (Size ranges from M 5 to 64) |
IS 1363 (Part 2) :2018 |
428 |
Hexagon Head Bolts, Screws and Nuts of product Grade C – Hexagon Nuts (Size Range M5 to M64) |
IS 1363 (Part 3) : 2018 |
429 |
Hexagon Head Bolts, Screws and Nuts of product Grades A and B – Hexagon Head Bolts (Size Range M 1.6 To M 64) |
IS 1364 (Part 1) : 2018 |
430 |
Hexagon Head Bolts, Screws and Nuts of Product Grades A and B – Hexagon Head Screws (Size Range M 1.6 to M 64) |
IS 1364 (Part 2) : 2018 |
431 |
Indicating Bolts for use in public baths and lavatories |
IS 4621 : 1975 |
432 |
Flush Bolts |
IS 5187: 1972 |
433 |
Fasteners – Threaded Steel Fastener – Step Bolts for Steel Structures |
IS 10238 : 2001 |
434 |
Fasteners – Threaded Steel Fasteners – Hexagon Head Transmission Tower Bolts |
IS 12427 : 2001 |
435 |
High Strength Structural Bolts |
IS 3757 : 1985 |
436 |
Tower Bolts- Non-ferrous metal |
IS 204 (Part 2) : 1992 |
437 |
Tower Bolts- Ferrous metals |
IS 204 (Part 1) : 1991 |
438 |
Stainless Steel Sliding Door Bolts (Aldrops) for use With Padlocks |
IS 15834 : 2022 |
439 |
Non-ferrous metal sliding door bolts (aldrops) for use with padlocks |
IS 2681: 1993 |
440 |
Mild steel sliding door bolts for use with padlocks |
IS 281 : 2009 |
441 |
Wrought Aluminium Alloy Bolt and Screw Stock for General Engineering purposes |
IS 1284 : 1975 |
442 |
Sliding locking bolts for use with padlocks |
IS 7534: 1985 |
443 |
Stainless steel Tower Bolts |
IS 15833 : 2009 |
444 |
High Strength Structural Nuts |
IS 6623 : 2004 |
445 |
Stainless Steel Cookware |
IS 14756 : 2022 |
446 |
Wrought Aluminium Utensils |
IS 1660:2009 |
447 |
Stainless Steel Sinks for Domestic Purposes |
IS 13983:1994 |
448 |
Round Open Top Sanitary Cans for Foods and Drinks – Tinplate |
IS 9396 (Part 1) : 1987 |
449 |
Aluminium Beverage Cans |
IS 14407:2023 |
450 |
Domestic Gas Stoves for use with Piped Natural Gas (PNG) |
IS 17153:2019 |
451 |
Portable Fire Extinguishers |
IS 15683:2018 |
452 |
Wheeled Fire Extinguishers |
IS 16018:2012 |
453 |
Bullet Resistant Jackets |
IS 17051:2018 |
Electric Ceiling Type Fans |
454 |
Electric Ceiling Type Fans |
IS 374:2019 |
Wood Based Boards |
455 |
Block Boards |
IS 1659:2004 |
456 |
Prelaminated particle boards from wood and other Lignocellulosic material |
IS 12823:2015 |
457 |
Particle boards of wood and other lignocellulosic materials (medium density) for general purpose |
IS 3087:2005 |
458 |
Medium density fibre boards for general purpose |
IS 12406:2021 |
459 |
Veneered particle boards |
IS 3097:2006 |
Cast Iron Products |
460 |
Cast iron man hole covers and frames |
IS 1726:1991 |
461 |
Cast iron/ductile iron drainage pipes and pipe fittings for over ground non-pressure pipelines socket and spigot series |
IS 1729:2002 |
462 |
Malleable cast iron pipe fittings |
IS 1879:2010 |
463 |
Cast iron single faced thimble mounted sluice gates |
IS 13349:1992 |
464 |
Vertically cast – iron pressure pipes for water, gas and sewage |
IS 1537:1976 |
465 |
Grey iron castings |
IS 210:2009 |
Solar DC Cable and Fire Survival Cable |
466 |
Electric Cable for Photovoltic Systems for rated voltage 1500V DC |
IS 17293:2020 |
467 |
Thermosetting Insulated, Fire Survival Cables for working voltage upto and including 1100V AC and 1500V DC |
IS 17505(Part 1): 2021 |
Metals and Alloys |
468 |
Cast aluminum and its alloys – Ingots and castings for general engineering purposes |
IS 617:1994 |
469 |
High-purity primary aluminum ingot for remelting for special applications |
IS 11890:1987 |
470 |
Aluminum alloy ingots for remelting for general engineering purpose |
IS 6754:1972 |
471 |
Primary aluminium ingots for remelting for general engineering purpose |
IS 2590 : 1987 |
472 |
Aluminum ingots billets and wire bars (EC GRADE) |
IS 4026:2023 |
473 |
Copper |
IS 191:2007 |
474 |
Nickel Powder |
IS 7506:1987 |
Plywood and Wooden flush door shutters |
475 |
Plywood for general purposes |
IS 303:1989 |
476 |
Wooden flush door shutters (solid core type) – Plywood face panels |
IS 2202 (Part-1) :1999 |
477 |
Marine plywood |
IS 710 : 2010 |
478 |
Fire retardant plywood |
IS 5509 : 2021 |
479 |
Veneered decorative plywood |
IS 1328:1996 |
480 |
Wooden flush door shutters (cellular and hollow core type) – Particle board and hardboard face panels |
IS 2191 (Part 2): 2022 |
481 |
Wooden flush door shutters (cellular and hollow core type) – Plywood face panels |
IS 2191 (Part 1): 2022 |
482 |
Wooden Flush Door Shutters (Solid core type) – Particle board, High Density Fibre Board, Medium Density Fibre Board and Fibre Hardboard Face Panels |
IS 2202 (Part 2): 2022 |
483 |
Plywood for concrete shuttering works – Specification |
IS 4990 : 2011 |
484 |
Structural plywood – Specification |
IS 10701 : 2012 |
Flux Cored Solder Wire |
485 |
Flux Cored Solder Wire |
IS 1921: 2005 |
Miscellaneous Steel Products |
486 |
Bar or wire Wrapped Steel Cylinder Pipes with Mortar Lining and Coating Including Specials |
IS 15155 : 2020 |
487 |
High Strength deformed stainless steel bars and wires for concrete reinforcement |
IS 16651 : 2017 |
488 |
Steel Pipe Flanges |
IS 6392 : 2020 |
489 |
Stainless steel tubes for the food and beverage industry |
IS 6913:1973 |
Aluminium and Aluminium Alloy Products |
490 |
Aluminium alloy tubes for irrigation purposes -welded tubes |
IS 7092 (Part 1):1992 |
491 |
Aluminium alloy tube for irrigation purposes – extruded tube |
IS 7092 (Part 2):1987 |
492 |
EC Grade Aluminium Rod produced by Continuous Casting and Rolling |
IS 5484:1997 |
493 |
Wrought aluminium and aluminium alloy bars, rods and sections (For General Engineering Purposes) |
IS 733:1983 |
494 |
Wrought aluminium and aluminium alloys, forging stock and forgings for general engineering purposes |
IS 734:1975 |
495 |
Wrought aluminium and aluminium alloy plate for general engineering purposes |
IS 736:1986 |
496 |
Wrought aluminium and aluminium alloy sheet and strip for general engineering purposes |
IS 737:2008 |
497 |
Wrought aluminium and aluminium alloy wire for general engineering purposes |
IS 739:1992 |
498 |
Wrought aluminium and aluminium alloy rivet stock for general engineering purposes |
IS 740:1977 |
499 |
Wrought aluminium and aluminium alloy bars, rods, tubes, sections, plates and sheets for electrical applications |
IS 5082:1998 |
500 |
Aluminium and aluminium alloy foil for pharmaceutical packaging |
IS 16011:2012 |
501 |
Aluminium composite panel |
IS 17682:2021 |
502 |
Wrought aluminium and aluminium alloys- Extruded round tube and hollow sections for general engineering purposes |
IS 1285:2002 |
503 |
Wrought Aluminium Wire for Electrical Purposes |
IS 2067:1975 |
504 |
Wrought aluminium and aluminium alloys for manufacture of utensils |
IS 21:1992 |
505 |
Corrugated Aluminium Sheet |
IS 1254:2007 |
506 |
Aluminium alloy forging stock and forgings (Alloy 24345) for aerospace applications |
IS 7902:2001 |
507 |
Short – Pitch Transmission Precision Roller and Bush Chains, Attachments and Associated Chain Sprockets |
IS 2403 :2014 / ISO 606 : 2004 |
Self- Contained Drinking Water Coolers |
508 |
Self-Contained Drinking Water Coolers – Energy Consumption and Performance |
IS 1475 (Part 1) : 2001 |
Medical Textiles |
509 |
Sanitary napkins |
IS 5405 : 2019 |
510 |
Disposable baby diaper |
IS 17509 : 2021 |
511 |
Reusable Sanitary pad/ Sanitary Napkin/ Period Panties |
IS 17514 : 2021 |
512 |
Shoe covers |
IS 17349 : 2020 |
513 |
Dental Bib or Napkins |
IS 17354 : 2020 |
514 |
Bed sheet and Pillow Cover |
IS 17630 : 2021 |
Agro Textiles |
515 |
Polypropylene Spun Bonded Non—Woven Crop Cover and Fruit Skirting Bags for Agriculture and Horticulture Applications |
IS 16718 : 2021 |
516 |
Insect nets for Agriculture and Horticulture purpose |
IS 16513:2016 |
517 |
Jute Agro textiles for Growth of Plants and Suppression of Weeds |
IS 17070 : 2019 |
518 |
Woven Ground covers for Horticulture Application |
IS 16202 : 2014 |
519 |
High Density Polyethylene (HDPE) woven beds for vermiculture |
IS 15907:2010 |
520 |
Sapling bags for growth of seedling /sapling |
IS 16089:2013 |
521 |
High Density Polyethylene (HDPE) laminated woven lay flat tube for irrigation purpose |
IS 16190 : 2014 |
522 |
Nylon Knitted seamless gloves for tobacco harvesters |
IS 16390 : 2015 |
523 |
High density polyethylene (HDPE) laminated woven lay flat tube for use in mains and submains of drip irrigation system |
IS 16627:2017 |
524 |
Propylene Spun bonded non—woven mulch mat for agriculture and horticulture applications |
IS 17355:2020 |
525 |
Windshield nets for agriculture and horticulture purpose |
IS 17356 : 2020 |
526 |
Harvest nets for agriculture and horticulture purposes |
IS 17357 : 2020 |
527 |
Fencing nets for agriculture and horticulture purposes – made from extruded polymer mesh |
IS 17358 (Part 1) : 2020 |
528 |
Fencing nets for agriculture and horticulture purposes -made from mono filament yarns and combination of tape and mono filament yarns |
IS 17358 (Part 2) : 2020 |
529 |
Plant Support Nets for Agriculture and Horticulture Purposes |
IS 17513 : 2020 |
530 |
High Density Polyethylene (HDPE) Laminated Woven Lay Flat Tube and Fittings for use in Rain Irrigation System |
IS 17728 : 2021 |
531 |
Flexible Water Storage Tank for Agriculture and Horticulture Purposes |
IS 17729 : 2021 |
532 |
Hail Protection Nets for Agriculture and Horticulture Purposes- Warp Knitted Hail Protection Nets |
IS 17730 (Part 1) : 2021 |
533 |
Hail Protection Nets for Agriculture and Horticulture Purposes – Woven Hail Protection Nets |
IS 17730 (Part 2) : 2021 |
534 |
Laminated Woven Orchard Protection Covers |
IS 17731 : 2021 |
Copper Products |
535 |
Copper Wire Rods for Electrical Applications |
IS 12444:2020 |
536 |
Copper Rods and Bars for Electrical Purposes |
IS 613:2000 |
537 |
Copper strip for electrical purposes |
IS 1897:2008 |
538 |
Copper rods and bars for general engineering purposes |
IS 4171:1983 |
539 |
Solid drawn copper and copper alloy tubes for condensers and heat exchangers |
IS 1545: 1994 |
540 |
Solid drawn copper tubes for general engineering purposes |
IS 2501:1995 |
541 |
Copper Tubes for plumbing- Specification |
IS 14810:2000 |
542 |
Wrought Copper Tubes for Refrigeration and Air- Conditioning Purpose |
IS 10773:1995 |
543 |
Copper wires for general engineering purposes |
IS 4412:1981 |
Drums and Tins |
544 |
Drums, Large Open Top |
IS 13997:2014 |
545 |
Drums Large, Fixed Ends – Grade A |
IS 1783 (Part 1) :2014 |
546 |
Drums, Large, Fixed Ends – Grade B |
IS 1783 (Part 2) :2014 |
547 |
Steel Drums (Galvanized and Ungalvanized) |
IS 2552:1989 |
548 |
Bitumen Drums |
IS 3575:1993 |
549 |
Square Tins for Solid Products |
IS 916:2000 |
550 |
Square Tins – 15 Kilograms or litre for Ghee, Vanaspati, Edible Oils and Bakery |
IS 10325:2000 |
Door Fittings |
551 |
Door closers (pneumatically regulated) for light doors weighing up to 40 kg |
IS 6343:1982 |
552 |
Door closers, concealed type (hydraulically regulated) |
IS 14912:2001 |
553 |
Hydraulically Regulated Door Closers |
IS 3564:1995 |
554 |
Floor springs (hydraulically regulated) for heavy doors |
IS 6315:1992 |
555 |
Rim Latches |
IS 1019:1974 |
556 |
Door Handles |
IS 208:2020 |
557 |
Door handles for mortice lock (vertical type) |
IS 4992:1975 |
Bottled Water Dispenser |
558 |
Bottled water dispensers |
IS 17681:2022 |
Helmet for Police Force, Civil Defence and Personal Protection |
559 |
Non-metal helmet for firemen and civil defence personnel |
IS 2745:1983 |
560 |
Industrial safety helmets |
IS 2925:1984 |
561 |
Non- metal helmet for Police Force |
IS 9562:1980 |
Steel Wires or Strands, Nylon or Wire Ropes and Wire mesh |
562 |
Steel Wire Ropes for General Engineering Purposes |
IS 2266 : 2019 |
563 |
Steel Wire Suspension Ropes for Lifts, Elevators and Hoists |
IS 2365 : 2018 |
564 |
Stranded steel wire ropes for winding and man-riding haulages in mines |
IS 1855:2022 |
565 |
Steel Wire Rope for haulage |
IS 1856:2005 |
566 |
Hot Dip Galvanized Stay Strand |
IS 2141:2000 |
567 |
Wire Ropes Used in Oil Wells and Oil Well Drilling |
IS 4521:2001 |
568 |
Braided Nylon Ropes for Mountaineering Purposes |
IS 6590:1972 |
569 |
Galvanized Steel Barbed Wire for Fencing |
IS 278:2009 |
570 |
Galvanized Steel Wire or Galvanized Steel Wire with polymer coating |
IS 16014:2018 |
Material Measure of length |
571 |
Legal Metrology – Material Measure of length – Woven metallic and glass fibre tape measures |
IS 1269(Part 1) : 1997 |
572 |
Legal Metrology-Material Measure of length-Steel tape measures |
IS 1269(Part 2) : 1997 |
Polyethylene Woven Sacks |
573 |
Textile-High Density Polyethylene (HDPE) /Polypropylene (PP) Woven Sacks for Packaging Fertilizers |
IS 9755 : 2021 |
574 |
Textile-High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for Packaging of 50 kg Cement |
IS 11652 : 2017 |
575 |
Textiles-Polypropylene (PP) Woven, Laminated, Block Bottom Valve Sacks for Packaging of 50 kg Cement |
IS 16709: 2017 |
576 |
Textiles-High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for Packaging of 25 kg Polymer Materials |
IS 16703: 2017 |
577 |
Textiles-Polypropylene (PP)/ High Density Polyethylene (HDPE) Laminated Woven Sacks for Mail Sorting, Storage, Transport and Distribution |
IS 17399: 2020 |
Safes, Safe Deposit Locker Cabinets and key locks |
578 |
Safes |
IS 550 (Part 1): 2014 |
579 |
Safe deposit locker cabinets |
IS 5244 : 2020 |
580 |
Key locks for security equipment |
IS 17566: 2021 |
Hinges |
581 |
Stainless steel butt hinges |
IS 12817: 2020 |
582 |
Steel Butt Hinges |
IS 1341:2018 |
583 |
Non-ferrous metal butt hinges |
IS 205:1992 |
584 |
Tee and strap hinges |
IS 206:2010 |
585 |
Parliament hinges |
IS 362:1991 |
586 |
Continuous (Piano) hinges |
IS 3818:1992 |
587 |
Steel back flap hinges |
IS 3843: 1995 |
588 |
Double-acting spring hinges |
IS 453:1993 |
589 |
Cabinet hinges |
IS 18297:2023 |
Cycle and Rickshaw Tyres and Tubes |
590 |
Cycle and Rickshaw Pneumatic Tyres |
IS 2414:2005 |
591 |
Cycle-Rubber Tubes (Moulded or Jointed) |
IS 2415 :2015 |
Rubber Gaskets for Pressure Cookers |
592 |
Rubber Gaskets for Pressure Cookers |
IS 7466 :2023 |
Laboratory Glassware |
593 |
Graduated measuring cylinders |
IS 878 :2008 |
594 |
One Mark volumetric flasks |
IS 915:2012 |
595 |
Narrow-necked boiling flasks |
IS 1381 (Part 1):2003 |
596 |
Single volume pipettes |
IS 1117:2018 |
597 |
Glass beakers |
IS 2619:2018 |
Electrical Accessories |
598 |
Boxes and Enclosures for Electrical Accessories for Household and Similar Fixed Electrical Installations |
IS 14772: 2020 |
599 |
Cable Trunking and Ducting Systems for Electrical Installations – Cable Trunking and Ducting Systems Intended for Mounting on Walls or Ceiling |
IS 14927 (Part 2): 2001 |
600 |
Bayonet Lamp Holders |
IS 1258: 2005 |
601 |
Switch-socket-outlets (non-interlock type) |
IS 15787: 2008 |
602 |
Live Working Gloves of Insulating Material |
IS 13774:2021 |
603 |
Insulating Mats for Electrical Purposes |
IS 15652:2006 |
604 |
Specification for Pressure sensitive adhesive insulating tapes for electrical purposes |
IS 7809 (Part3/ Sec1): 1986 |
605 |
Poly-Laminated aluminium cable wrap |
IS 16012: 2012 |
606 |
Poly Vinyl Chloride (PVC) Homopolymers |
IS 17658:2021 |
607 |
Polypropylene (PP) Materials for Moulding and Extrusion |
IS 10951:2020 |
608 |
Diesel Engines – NOx Reduction Agent AUS 32 |
IS 17042 (Part-1):2018 |
609 |
Evaporative Air Coolers (Desert Coolers) |
IS 3315:2019 |
610 |
Air Filters for general ventilation |
IS 17570 (Part 1):2021 ISO 16890-2:2016 |
611 |
Safety of household and similar electrical appliances – particular requirements – toasters, grills, roasters and similar appliances |
IS 302 (Part 2/Sec 9): 2009 |
612 |
Safety of household and similar electrical appliances – particular requirements – appliances for skin or hair care |
IS 302 (Part 2/Sec 23):2009 |
613 |
Safety of household and similar electrical appliances – particular requirements – range hoods |
IS 302 (Part 2/Sec 31):2009 |
614 |
Household and similar electrical appliances – Safety – particular requirements for fans |
IS 302 (Part 2/Sec 80):2017 |
615 |
Safety of household and similar electrical appliances – particular requirements – domestic electric clothes washing machines |
IS 302 (Part 2/Sec 7):2010 |
616 |
Safety of Household and Similar Electrical Appliances – Particular Requirements – Commercial Dispensing Appliances and Vending Machines |
IS 302 (Part 2/Sec 75):2018 |
617 |
Corrugated and Semi – Corrugated Asbestos Cement Sheets |
IS 459:1992 |
618 |
Asbestos Cement Pressure Pipes and Joints |
IS 1592:2003 |
619 |
Asbestos Cement Flat Sheets |
IS 2096:1992 |
620 |
Asbestos Cement Building Boards |
IS 2098:1997 |
621 |
Asbestos–Cement Pipes and Fittings for Sewerage and Drainage |
IS 6908:1991 |
622 |
Silica-Asbestos-Cement Flat Sheets |
IS 13000:1990 |
623 |
Asbestos Cement Cable Conduits and Troughs |
IS 8870:1978 |
624 |
Asbestos Cement Pressure Pipes (Light Duty) |
IS 9627:1980 |
625 |
Shallow Corrugated Asbestos Cement Sheets |
IS 13008:1990 |
626 |
Fibre Cement Flat Sheets |
IS 14862:2000 |
627 |
Fibre Reinforced Cement Products – Long Corrugated or Asymmetrical Section Sheets and Fittings for Roofing and Cladding |
IS 14871:2000 |
628 |
Water meters (bulk type) |
IS 2373:1981 |
629 |
Water meters (domestic type) |
IS 779: 1994 |
630 |
Ferrules for water services |
IS 2692:1989 |
631 |
Gypsum plaster boards – Specification: Part 1 plain gypsum plaster boards |
IS 2095 (Part 1):2011 |
632 |
Glass Fibre Reinforced Gypsum Panels |
IS 17400:2021 |
633 |
Gypsum Plaster Boards – Coated/ Laminated Gypsum Plaster Boards |
IS 2095 (Part 2): 2022 |
634 |
Gypsum Plaster Boards – Reinforced Gypsum Plaster Boards and Ceiling Tiles |
IS 2095 (Part 3):2022 |
Electrical Appliances for domestic water heating |
635 |
Appliances for stationary storage type electric water heaters |
IS 302 (Part 2/Sec 21): 2018 |
636 |
Appliances for electric instantaneous water heaters |
IS 302 (Part 2/Sec 35): 2017 |
637 |
Electric Immersion Water Heaters |
IS 368: 2014 |
638 |
Stationary storage type electric water heaters |
IS 2082: 2018 |
639 |
Mini domestic water heater for use with piped natural gas (PNG)s |
IS 17150: 2019 |
V-Belt |
640 |
Endless V-Belts for Industrial Purposes-General Purpose |
IS 2494 (Part 1): 1994 |
641 |
Endless V-Belts for Industrial Purposes–fire resistant and antistatic V-Belts |
IS 2494 (Part 2): 1993 |
642 |
Transmission Devices –V–Belts endless narrow V-Belts for industrial use |
IS 14261: 1995 |